• 完美体育(中国)官方登录中心

    DS-3E1105P-EI/M

    4 Port Fast Ethernet Smart POE Switch

    • 4 × 10/100 Mbps PoE port,1 × 10/100 Mbps RJ45 port
    • Total PoE Power Budget 45W
    • Support 802.1Q VLAN
    • Support PoE watchdog to detect and restart the cameras that do not respond
    • Support STP/RSTP Loop prevention
    • Support cable detection to locate failure
    • Up to 300 m Long Range PoE Transmission
    • 6 KV Surge Protection
    View Less
    View more
    Data Sheet
    Sales Inquiry

    Available models:

    DS-3E1105P-EI/M
    DS-3E1105P-EI/M

    Specification

    • General
    • ShellMetal material, fan-free design
    • Net Weight0.26 kg (0.573 lb)
    • Gross Weight0.75 kg (1.65 lb)
    • Dimensions (W × H × D)121.1 mm × 27.6 mm × 83.1 mm (4.77'' × 1.09'' × 3.27'')
    • Operating Temperature0 °C to 40 °C (32 °F to 104 °F)
    • Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F)
    • Operating Humidity5% to 95% (no condensation)
    • Relative Humidity5% to 95% (no condensation)
    • Power Supply54VDC, 0.92A
    • Installation ModeDesk-Mounted,Wall-Mounted
    • Max. Power Consumption50 W
    • Power Consumption in Idle5 W
    • Surge Protection6 KV
    • Network Parameters
    • Kikötők 4 × 10/100 Mbps PoE port,1 × 10/100 Mbps RJ45 port
    • MAC Address Table2 K
    • Switching Capacity1.2 Gbps
    • Packet Forwarding Rate0.89 Mpps
    • Internal Cache768 Kbits
    • PoE Power Supply
    • PoE StandardIEEE 802.3af,IEEE 802.3at
    • PoE Power Pin8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
    • PoE PortPoE: Ports 1 to 4
    • Max. Port Power30 W
    • PoE Power Budget45 W
    • Software Function
    • Port IsolationPorts 1 to 4: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
    • PoE WatchdogPorts 1 to 4: auto detect and restart the cameras that do not respond.
    • Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 1 aggregation groups.
    • Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.
    • VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN.
    • Long RangePorts 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition.
    • HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
    • System MaintenanceSupport remote management via Hik-Partner Pro.
    • VIP PortPorts 1 to 2: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient.
    • Approval
    • EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
    • SafetyCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
    • ChemistryCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
    *Product performance is based on testing in a controlled environment. Your results may vary due to several external and environmental factors.

    Specification

    Specification
    General
    • ShellMetal material, fan-free design
    • Net Weight0.26 kg (0.573 lb)
    • Gross Weight0.75 kg (1.65 lb)
    • Dimensions (W × H × D)121.1 mm × 27.6 mm × 83.1 mm (4.77'' × 1.09'' × 3.27'')
    • Operating Temperature0 °C to 40 °C (32 °F to 104 °F)
    • Storage Temperature-40 °C to 85 °C (-40 °F to 185 °F)
    • Operating Humidity5% to 95% (no condensation)
    • Relative Humidity5% to 95% (no condensation)
    • Power Supply54VDC, 0.92A
    • Installation ModeDesk-Mounted,Wall-Mounted
    • Max. Power Consumption50 W
    • Power Consumption in Idle5 W
    • Surge Protection6 KV
    Network Parameters
    • Kikötők 4 × 10/100 Mbps PoE port,1 × 10/100 Mbps RJ45 port
    • MAC Address Table2 K
    • Switching Capacity1.2 Gbps
    • Packet Forwarding Rate0.89 Mpps
    • Internal Cache768 Kbits
    PoE Power Supply
    • PoE StandardIEEE 802.3af,IEEE 802.3at
    • PoE Power Pin8-pin power: 1/2(-), 3/6(+), 4/5(+), 7/8(-)
    • PoE PortPoE: Ports 1 to 4
    • Max. Port Power30 W
    • PoE Power Budget45 W
    Software Function
    • Port IsolationPorts 1 to 4: port isolation mode to improve network security Ports in an isolation group cannot communicate with each other, but they can communicate with ports outside the isolation group.
    • PoE WatchdogPorts 1 to 4: auto detect and restart the cameras that do not respond.
    • Link AggregationLink aggregation is used to aggregate multiple physical ports to form a logical port for load balancing, bandwidth expansion, and port protection. Support static link aggregation. Support 1 aggregation groups.
    • Loop PreventionLoop prevention is used to prevent the switching network from forming loops, which will seriously affect network communication. Disabled by default. Support 802.1D STP. Suppport 802.1w RSTP.
    • VLANVLAN is used for network scale planning and network health improvement. Support 802.1Q. Configurable VLAN ID from 1-4094. Support Trunk, Access port mode. Support Max. 32 VLAN.
    • Long RangePorts 1 to 4: up to 300 m. Long range performance may vary depend on camera model or cable condition.
    • HPPSupport one-click activation and remote management via Hik-Partner Pro. Functions supported: 1. Display the port rate. 2. Display the port bandwidth utilization rate. 3. Display the PoE power usage. 4. Display topology information. 5. Display the alarm status. 6. Restart ports and devices. 7. Enable port long-rage mode. 8. Remotely upgrade the device.
    • System MaintenanceSupport remote management via Hik-Partner Pro.
    • VIP PortPorts 1 to 2: data on VIP ports is preferentially forwarded when bandwidth resources are insufficient.
    Approval
    • EMCCE-EMC (EN 55032: 2015+A11: 2020, EN IEC 61000-3-2: 2019, EN 61000-3-3: 2013+A1: 2019, EN 50130-4: 2011+A1: 2014, EN 55035: 2017+A11: 2020)
    • SafetyCB (AMD1:2009, AMD2:2013, IEC 62368-1: 2014 (Second Edition), CE-LVD (EN 62368-1: 2014+A11: 2017)
    • ChemistryCE-RoHS (2011/65/EU),WEEE (2012/19/EU),Reach (Regulation (EC) No.1907/2006)
    *Product performance is based on testing in a controlled environment. Your results may vary due to several external and environmental factors.

    Resources

    Technical documents

    Data Sheet
    Quick Start Guide
    User Manual
    For better user experience, we highly recommend you to update your device to the latest firmware asap.
    Applied to:
    DS-3E1105P-EI/M
    Kereskedelmi igény
    Technikai támogatás kérése
    Hírlevél feliratkozás
    Online támogatás
    Hol lehet megvásárolni?
    Weboldal visszajelzés
    Kapcsolat
    Hik-Partner Pro close
    Hik-Partner Pro
    Security Business Assistant. At Your Fingertips. Learn more
    Hik-Partner Pro
    Scan and download the app
    Download
    Hik-Partner Pro
    Hik-Partner Pro

    Get a better browsing experience

    You are using a web browser we don』t support. Please try one of the following options to have a better experience of our web content.